Volkswagen Passat 1995 Official Factory Repair Manual page 4288

Work descriptions
- ATF must be filled up in cold condition at least up to 20
C-marking, otherwise add ATF.
- Bring ATF to a temperature of 50 ... 70
will be measured using Scan Tool (ST) V.A.G 1551/ as
follows:
- Let engine run at idle.
Connect Scan Tool (ST) V.A.G 1551/ using adapter cable
V.A.G 1551/3 A ( 01-5, Connecting scan tool VAG
1551: ).
At Scan Tool (ST) V.A.G 1551/ :
Indicated on display:
VAG - On Board Diagnostic (OBD) HELP
1- Rapid data transfer*
or
VAG - On Board Diagnostic (OBD) HELP
2- Blink code output*
* Two operating modes are displayed alternately
- Press button -1- to select "Rapid data transfer" operating
mode.
Indicated on display:
Rapid data transfer HELP
Enter address word XX
- Press buttons 0 and 2 for address word "Transmission
electronics" and confirm input with Q button.
Indicated on display:
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
C. temperature
Page 58 of 83
12/7/2004