Volkswagen Passat 1995 Official Factory Repair Manual page 3970

Door trim
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.70.2
Installing
- When replacing foil, remove remaining adhesive
on door -2-. Remove some of old adhesive, form a
ball and use it to dab off remaining adhesive.
Replacement moisture barrier foil up to 02.95
- Guide electrical wiring for door components
(window motor, loudspeaker and seat adjusters)
through foil and remove protective strip from
adhesive.
- Adjust foil according to openings for securing clips
and press on.
- Press on moisture barrier foil in adhesive area
(hatched area) -1- to door all around using roller
3356.
- Check for firm adhesion especially at lower section
of door.
Page 18 of 19
70-32
12/7/2004