Volkswagen Passat 1995 Official Factory Repair Manual page 4270

Work descriptions
Torque wrench V.A.G 1331/ (5 - 50 Nm)
n
Emissions Test binder
n
Perform following work procedure:
- Disconnect spark plug connectors using assembly tool
T10029 .
- Remove spark plugs using spark plug removal tool VAS
3122B .
Note:
Spark plug identification and tightening torque
n
Emissions Test
Observe disposal regulations!
n
- Install new spark plugs using spark plug removal tool VAS
3122B .
- Connect spark plug connectors using assembly tool
T10029 .
- Check ignition wires and spark plug connectors for secure
seating.
Dust and pollen filter element, replacing
Filter is located below plenum chamber on right.
Perform following work procedure:
Removing
- Turn buttons - 1 - for mounting of cover around 45
remove cover from partition to engine compartment.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
and
Page 40 of 83
12/7/2004