Volkswagen Passat 1995 Official Factory Repair Manual page 4009

Headliner
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.70.4
Roof dampening / reinforcement,
removing and installing
Notes:
The function of roof reinforcement and
dampening is accomplished by material glued
to the roof.
For sheet metal work on the roof, the
dampening/reinforcement material can be cut
out. The cut-out area must not be larger than
2 2
1000 cm 155 in.
15.5 in. x 9.8 in.).
The cut-out area must be replaced after
completion of the repair. If the cut-out area
must be larger than 1000 cm
lengthwise through the dampening/
reinforcement material, then the entire material
must be replaced.
Required tools:
Carpet roller, approx. 150 to 200 mm wide
Notched putty knife (tooth height 2 to 3 mm)
Carpet utility knife
Hot air gun
Page 10 of 13
(example: 40 cm x 25 cm or
2
across or
70-71
12/7/2004