Volkswagen Passat 1995 Official Factory Repair Manual page 4290

Work descriptions
Indicated on display:
Read measuring value block Q
Enter display group number 005
- Press Q button to confirm input.
ATF temperature in
measuring value only starting from 50
Read measuring value block 1
1 2 3 4
- Check ATF level at a temperature of 50 ... 70
dipstick. ATF level must be between min. and max. marking
of dipstick.
- If ATF level is too low, add ATF using a funnel.
- If ATF level is too high, extract ATF using probe V.A.G
1358/ A2 and V.A.G1358 .
- Shift once into all selector lever positions while standing
and with engine running.
- Check ATF level again (at 50 ... 70
At Scan Tool (ST) V.A.G 1551/ :
- Press button.
Indicated on display:
Rapid data transfer HELP
Select function XX
- Press buttons 0 and 6 for function "End data transfer" and
confirm input with Q button.
- Switch off ignition and disconnect diagnostic connector.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
C appears in display field 1 (exact
C).
C)
C using
Page 60 of 83
12/7/2004