Work descriptions
- Unthread bolt for checking transmission fluid - arrow - .
Oil level is correct when the rear final drive is filled up to
lower edge of oil filler hole.
- Screw in bolt - arrow - .
When filling anew, note the following:
- Unthread bolt - arrow - .
- Top up transmission fluid to lower edge of oil filler hole.
- Screw in bolt - arrow - .
Automatic transmission, check final drive oil
level
Note:
Observe disposal regulations!
n
- Remove drive for speedometer, wipe off with a cloth, and
install drive again.
- Remove drive and check oil level.
Oil level must be between min. and max. marking.
Note:
Oil capacity between min. and max. marking is 0.1L.
n
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
Page 29 of 83
12/7/2004