Volkswagen Passat 1995 Official Factory Repair Manual page 4310

Work descriptions
- With low beam switched on, check whether horizontal
light-dark border contacts hyphenated line - 1 - of test
surface.
- Check whether break-away point - 2 - between left
horizontal part and rising part on right of light-dark border
runs vertically through central point - 3 - . Bright core of light
beam must be on right of vertical line.
Note:
To make it easier to find break-away point - 2 - cover
n
and uncover left half of headlight (as viewed when
looking forward) a few times. Next, check low beam
again.
After correct adjustment of low beams center point of
n
light beam of high beams must lie on central mark - 3
- .
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
Page 80 of 83
12/7/2004