Volkswagen Passat 1995 Official Factory Repair Manual page 3978

Trim
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.70.3
Upper C-pillar trim,
removing and installing
Notes:
The trim fits over sealing
flange of door seal section,
see section A-A.
Illustration shows Sedan,
for Wagon there is an
additional clip in the roof
frame.
1 - Trim
To remove, first
remove upper trim for
B-pillar and cover of
inertia reel for safety
belt. Also loosen trim
for D-pillar.
Removing
- Remove grab handle
-5-.
- Pry out cover cap -2-
.
- Remove screws -3-
and -10-.
- Pull lower side of
trim down and
remove from seal
flange and clips -8-.
Installing:
Press over sealing
flange and then push
into clips.
Page 7 of 28
70-40
12/7/2004