Front seat
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.72.1
Cable, adjusting
- Install complete cable including springs on
height adjustment mechanism.
- Adjust threaded sleeve -1- in such a way that locks
-2- of height adjustment mechanism can be
operated on both sides at same time.
Height adjustment mechanism, removing
- Block lever -1- with suitable turnbuckle -2- (i.e.
3004) and keep under slight tension.
Note:
The turnbuckle takes up the spring tension (arrow) of
the height adjustment mechanism during removal.
The threaded bolts of the turnbuckle must have
enough length for opening.
Page 17 of 31
72-17
12/7/2004