Volkswagen Passat 1995 Official Factory Repair Manual page 4286

Work descriptions
V.A.G1358A and sensor V.A.G 1358/ A2
n
Torque wrench V.A.G 1331/ (5 - 50 Nm)
n
Perform following work procedure:
- Extract ATF using probe V.A.G 1358/ A2 and V.A.G1358 .
Note:
Observe disposal regulations!
n
Engine must not be started without ATF and vehicle
n
must not be towed!
- Remove oil pan with ATF-strainer.
- Remove spacers from old oil pan seal.
- Clean oil pan.
Pay attention to cleanliness during following
installation!
- Snap new seal into new ATF-strainer.
- Snap removed spacers into new oil pan seal.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
Page 56 of 83
12/7/2004