Volkswagen Passat 1995 Official Factory Repair Manual page 4251

Work descriptions
Capacities with filter change:
Tightening torque for drain plug:
4-cyl. engines: 30 Nm
n
6-cyl. engines: 50 Nm
n
Oil filter, replacing
4-cyl. engine
Note:
Observe disposal regulations!
n
- Loosen oil filter using tension strap (e.g. Hazet 2171-1)
and remove oil filter.
- Clean engine sealing surface.
- Lubricate rubber seal lightly with oil.
- Install new filter element and tighten hand-tight.
6-cyl. engine
Note:
Observe disposal regulations!
n
- Drain oil at drain plug.
- Remove filter lower part using tool.
- Install new filter element and new O-ring (oiled).
- Tighten filter lower part with 25 Nm and drain plug with
new sealing ring with 10 Nm.
Engine oil, filling
Oil capacities with filter change:
Due to positive properties of oils (
use only following approved engine oils:
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
for emissions test
Emissions test
01-5, Oil properties )
Page 21 of 83
12/7/2004