Volkswagen Passat 1995 Official Factory Repair Manual page 4039

Front seat
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.72.1
- Pry front mounting point -1- of tilt mechanism out
(firm bushing with collar) and push shaft for tilt
mechanism -2- parallel toward rear (arrows) until
rear mounting point -3- is pushed out of guide.
Note:
If necessary lightly tap with hammer to help parallel
movement of the shaft for tilt mechanism.
- Remove lower frame with tilt mechanism.
Height adjustment mechanism, removing
- Block lever -1- with suitable turnbuckle -2- (i.e.
3004) and keep under slight tension.
Note:
The turnbuckle takes up spring tension (arrow) of the
height adjustment mechanism during removal. The
threaded bolts of the turnbuckle must have enough
length for opening.
Page 27 of 31
72-27
12/7/2004