Volkswagen Passat 1995 Official Factory Repair Manual page 4273

Work descriptions
Perform following work procedure:
- Open clips of upper toothed belt protection.
- Pull upper toothed belt protection forward or remove it if
necessary.
- Measure width of toothed belt using a caliper.
- Wear limit: 22 mm
Note:
With a toothed belt width of 22 mm toothed belt has
n
reached its wear limit and must be replaced (repair
measure). Inform customer!
Fuel filter, replacing (diesel engine)
Note:
Make sure that diesel does not come in contact with
n
coolant hoses. Clean hoses immediately if necessary!
Observe disposal regulations!
n
Perform following work procedure:
Removing
- Remove retaining clamp - 5 - .
- Remove regulating valve with attached fuel lines.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
Page 43 of 83
12/7/2004