4 POSITIONING DEDICATED SIGNALS
POINT
• Total number of points for the user devices
6632 points
(Note-1) :
"The virtual servomotor axis/cam axis monitor device" occupy only
the areas of the axes set in the mechanical system program. The unused
axis areas in the mechanical system program can be used as an user
side.
(Note-2) : Only details for data registers used in the virtual mode are described in this
manual. If it is required, refer to the "Q173CPU(N)/Q172CPU(N) Motion
controller (SV13/SV22) Programming Manual (REAL MODE)".
4 - 58