External Line Call Direction - Siemens HiPath 1100 Programming Manual

Programming an External Line
Step by Step
44
Enter the next external line number.
or
Press this key.
#
Initial state for Programming Mode.
Country
Brazil, China, India, Peru, IM-
Spain and IM-English
Russia
Other countries

External Line Call Direction

When a user tries to access a line, lines that have been
previously programmed as outgoing are given priority. If
an incoming call is received over that line, however, it
will come through as usual.
To avoid this situation the method for accessing external
lines can be defined at the time of making or receiving
a call. This facility is usually contracted with the local
carrier to ensure optimal usage of all lines available.
Required: Programming Mode must be active (*95
31994).
1 5 5 Enter the code for programming.
Enter a number for an external line (e.g., 801).
...
Enter the number for the type of access to an external
1 3
line:
1
2
3
Enter the next external line number.
or
Press this key.
#
Initial state for Programming Mode.
When a Country setting is specified ("Country/
Group of Countries" on page 21), the appropriate
protocol is automatically selected.
= Bidirectional (default)
= Unidirectional incoming
= Unidirectional outgoing
Protocol Code
DTMF1 1
DTMF2
2
(off hook)
FSK 3