Step by Step
0 1
0 1
*
Enter the extension number (e.g., 12/102) that you want
to assign to a mailbox or, if using MSN Attendants, an
EVM Virtual Port - 744 to 747 (e.g., 744) to be assigned.
Press this key.
#
Initial state for Programming Mode.
Mailbox Password
This setting allows you to create a password for a spe-
cific mailbox. The default password is "1234".
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 0 4
...
Enter the number of the mailbox you would like to se-
2 4
lect.
Enter a new password (up to 4 digits).
Press this key.
#
Initial state for Programming Mode.
Mailbox Recording Activation
This setting allows you to record a greeting or a mes-
sage to be played by the EVM.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 0 5
...
Enter the number of the mailbox you would like to se-
2 4
lect.
or
#
To activate/deactivate the Recording Mode:
= To activate
*
#
= To deactivate (default)
Press this key.
#
Initial state for Programming Mode.
EVM Module
159