Remote Administration Password; Remote Msn - Siemens HiPath 1100 Programming Manual

General Programming
Step by Step
...
0 0 1
114

Remote Administration Password

This feature assigns a password for enabling Remote
Administration using a specified external number (Ser-
vice MSN).
The default configuration does not specify a password.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 6 8
1 ... 4 Select a slot for the external number (1 to 4).
Enter a password (5 digits).
... Select the next external number.
1 4
or
# Press this key.
Initial state for Programming Mode.

Remote MSN

This setting specifies an MSN of your ISDN line as the
Remote Administration MSN.
The default configuration does not specify a MSN.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 6 9
1 4 0 Enter the slot (001 ... 140) for the MSN.
or
Press the key to remove it.
*
Initial state for Programming Mode.