B Channel - Siemens HiPath 1100 Programming Manual

Programming a Digital Trunk
Step by Step
, ,
0 1 0 2 0 3
146
or
Activate/Deactivate Layer
* #
= To activate
*
# = To deactivate
Initial state for Programming Mode.

B Channel

Allows you to change some default ISDN settings for
specified countries.
Required: Programming Mode must be active (*95
31994).
1 0 3 Enter the code for programming.
or Enter the S
1 1
Enter the slot for the S
0 0
external line only - PP or PMP)
0 0
0 0
ule, enter slot 11 and port 00 ... 04).
or
* # Master/Slave.
= Master
*
# = Slave
Initial state for Programming Mode.
[1] Module slots are: HiPath 1120 (02), HiPath 1150 (03) and HiPath
1190 (01 and 11).
Module slot on the system
0
module slot:
0
... 0 1 = On the HiPath 1120 (Port 00 slot is for
... = For HiPath 1150;
0 4
... 0 4 = For HiPath 1190 (for the second mod-
1
.