Dialing Mode On An External Analog Line; Default Access To A Group Of; External Lines - Siemens HiPath 1100 Programming Manual

Main Configurations
Step by Step
24
Dialing Mode on an External Analog
Line
This features specifies the dialing mode to be used over
an external analog line (DP or MF).
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 1 9
Enter a number for an external analog line (e.g., 801).
...
Enter the appropriate code:
1 2
= Analog line: Pulse dialing (DP)
1
2
Enter the next external line number.
or
Press this key.
#
Initial state for Programming Mode.

Default Access to a Group of

External Lines

This feature specifies dialing "0" as the dialing method
for a group of external lines. The default external line ac-
cess code is "0."
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 0 2
Enter the extension number (e.g., 11/101).
Enter the number for the group of external lines (e.g., 0,
890, etc).
Enter the next extension number.
or
Press this key.
#
Initial state for Programming Mode.
= Analog line: Multifrequency tone dialing (MF)
(default
for all analog lines)