Activating External Message Waiting Indicator; External Mwi Group - Siemens HiPath 1100 Programming Manual

Step by Step
Activating External Message Waiting Indica-
tor
Activates the MWI feature for a group of extensions.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 1 4
or
Activate/Deactivate an external MWI group:
#
*
= To activate
*
= To deactivate (default)
#
Initial state for Programming Mode.

External MWI Group

The extensions configured for this group receive a Mes-
sage Waiting Indicator (MWI) signal from the external
Voice Mail Server.
By default, no extension is configured.
Required: Programming Mode must be active (*95
31994).
0 1 5 Enter the code for programming.
...
Enter the extension numbers (e.g., 11/101) to be includ-
ed in the external MWI group.
Press this key to finalize the entry.
#
Initial state for Programming Mode.
or
Press this key to delete the extensions in the group.
*
# Press this key to finalize the entry.
Initial state for Programming Mode.
The Group must be enabled to use this feature
(code 014).
The Message Waiting Indicator is signaled by
means of a LED key on system telephones and
by a distinctive audible tone on standard tele-
phones. In the case of a standard telephone en-
abled for CLIP FSK with MWI service the signal
can be configured to show an icon on the display
or some other type of indication.
Programming an Extension
81