Collect Call Barring For Fax/Did - Siemens HiPath 1100 Programming Manual

Fax/DID
Step by Step
134

Collect Call Barring for Fax/DID

When collect call barring is activate, all collect calls to a
Fax/DID are automatically rejected by the system. Call
Barring will not work in the case of calls transferred to a
Fax/DID.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 0 8
...
1 4 Select an operating mode for the Fax/DID Module:
1 = Fax
2 = DID
3 = Fax/DID
= Greeting (message)
4
or
Activate/Deactivate Collect Call Barring for the selected
#
*
mode:
= To activate
*
= To deactivate (default)
#
Enter the next operating mode.
or
Press this key.
#
Initial state for Programming Mode.
If a call has been answered at least once by the
system, Collect Call Barring cancels the blocking.
When an incoming call over a digital line is for-
warded for not being answered (*14), and Col-
lect Call Barring is activated, the call will ring at
the First Attendant for the external line.