Date For Updating The Call Cost Limit; For An Extension; Updating The Software; Sw Information - Siemens HiPath 1100 Programming Manual

General Programming
Step by Step
104

Date for Updating the Call Cost Limit

for an Extension

This specifies a day for resetting the Call Charge limit.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 4 5
Enter a day for resetting the limit (01 to 31).
d d
or
To deactivate.
*
Initial state for Programming Mode.

Updating the Software

SW Information

This displays information about the system's software.
To view this information use a system telephone with a
display.
The switch must be connected to a PC and the Com-
mServer and the APS Version Verifier must be running.
Required: Programming Mode must be active (*95
31994).
Enter the programming code to view the name of the
0 0 1
product, e.g., "HiPath 1150.
Press the key to view additional information:
*
1) Type of system;
2) Release;
3) Version;
4) APS;
5) Serial number;
Press this key.
#
Initial state for Programming Mode.
If 31 is entered, the Call Charge limit will be reset
to the last day of each month.