Configuring The Call Answering Mode - Siemens HiPath 1100 Programming Manual

Fax/DID
Step by Step
132

Configuring the Call Answering Mode

The Fax/DID Module's Auto-Answering Mode must be
configured individually for each analog and digital line.
Activation
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 2 7
Enter a number for an external analog or digital line
(e.g., 801).
... Select the operating mode for the line:
0 5
0 = Disabled
= Fax
1
= DID
2
= Fax/DID
3
= Greeting/Message
4
5 = Auto Fax
Enter the number for the next external line available.
or
Press this key.
#
Initial state for Programming Mode.
Deactivation
Required: Programming Mode must be active (*95
31994).
1 2 7 Enter the code for programming.
Enter a number for an external analog or digital line
(e.g., 801).
Enter the code for deactivating Fax/DID reception.
0
Enter the number for the next external line available.
or
# Press this key.
Initial state for Programming Mode.