Siemens HiPath 1100 Programming Manual page 29

Step by Step
or
1 2
...
0 1
Wait 5 seconds
or
1 2
...
0 1
Wait 5 seconds If no new number is entered after 5 seconds, the con-
or
Enter the Denied List number you want to delete.
3
3 5 Enter the list entry of the number to be denied access.
Enter the number that will be denied access (up to 16
digits).
Warning: Enter the number without the external access
code.
Wait for a confirmation tone.
Initial state for Programming Mode.
Deleting numbers from the Denied List
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 2 3
or
3 Enter the Denied List number you want to delete.
Enter the list entry number of the number to be delet-
3 5
ed.
tent of that entry is removed.
Initial state for Programming Mode.
To change a blocked number simply enter its list
entry number and the new number.
Main Configurations
29