Vmie Protocol - Siemens HiPath 1100 Programming Manual

Step by Step
Type of Call (TOC)
Required
1
Fixed size: 4 characters
Format: "***n" (n = code from table below)
Code Type of Call
1 Internal for Voice Mail
3 Call Forwarding (*11)
5 Not used
7 Not used
Calling extension
Required
2 Fixed size: 6 DTMF signals
Format: "****I" (I = calling extension)
External call format: always "******"
Extension called
Required element for calls Type 3 and 4.
3 This element remains blank for all other types of calls
Fixed size: 6 DTMF signals
Format: "****I" (I = extension called)
Additional information about the calling extension
Optional element
4
Fixed size: 2 DTMF signals
Format: "*I" (I = code in table below)
Code Information
1 The calling extension is a regular internal extension
2 Not used
3 The calling extension is an external user on an analog line.
4 The calling extension is an external user on a digital line

VMIe Protocol

Voice Mail analog connections require the VMIe proto-
col (Voice Mail Interface - extended). Voice Mail commu-
nication is carried out in the form of DTMF signals con-
sisting of the following information:
Code Type of Call
2 Not used
4 Second Attendant (*14)
6 Not used
8 Not used
Note: if an extension is
longer, the DTMF digit "*"
in the protocol is replaced
by the additional extension
digit.
Note: if an extension is
longer, the DTMF digit "*"
in the protocol is replaced
by the additional extension
digit.
VMIe Protocol
177