Call Forwarding - Busy After Call Forwarding No Answer - Siemens HiPath 1100 Programming Manual

Step by Step
*
Call Forwarding - Busy after Call For-
warding No Answer:
This option allows an incoming call to an extension con-
figured for Call Forwarding - No Answer (see Call for-
warding - No Answer in the Manual do Usuário) to be
routed to the same destination configured for Call For-
warding - Busy.
Required: Programming Mode must be enabled (*95
31994) and Call Forwarding - No Answer must be en-
abled as well.
Enter the code for programming.
1 8 5
Enter the extension number (e.g., 12/102).
or
To activate or deactivate permission for Call Forwarding
#
- Busy:
= To activate
*
= To deactivate (default)
#
Enter the next extension number
or
# Press this key.
Initial state for Programming Mode.
Urgent Call and Callback when Busy facilities do
not work when Call Forwarding - Busy and Call
Forwarding - No Answer are activated.
If the extension called is configured to use Do Not
Disturb and Call Forwarding - Busy then the call
will be forwarded. If Do Not Disturb is enabled at
the destination to which the call is forwarded, the
caller will hear a busy signal.
Programming an Extension
73