Local Area Code Filter - Siemens HiPath 1100 Programming Manual

Programming a Digital Trunk
Step by Step
...
0 0 1
...
0
0 1
...
0 0 1
152
Enter the code for programming.
0 0 4
1 4 0 Enter the slot for the MSN number.
or
Choose a period of time for the assignment of MSN to
1 2
extensions:
= Day
1
= Night
2
Enter the slot for the group with a busy signal.
1 4 0
1 4 0 Enter the next slot for the group with a busy signal.
or
Press this key.
#
Initial state for Programming Mode.

Local Area Code Filter

When a call is received, the local area code (LAC) serves
as a filter for the number entered and determines its
type.
By default, no number is set.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 1 1
Enter the Local Area Code (up to 10 digits).
Press this key.
#
Initial state for Programming Mode.
This feature is valid only for digital lines with
MSN numbers. It is not valid if more than one ex-
tension is configured for a MSN number.
When the Fax/DID facility is configured for digital
lines, this feature is not operational.