General Programming
Step by Step
118
MSN Identification Mode
This setting specifies how the MSN is shown on a
system telephone display. In the default configuration
no Mode is configured.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 2 4
...
Select the information to be shown on the display:
0
2
0
= None (Default)
= MSN number
2
= MSN number
2
Initial state for Programming Mode.
Remote Administration Password
through an MSN
This setting allows you to specify a password so that all
incoming calls from a remote HiPath 1100 Manager that
provides the correct password can be authorized to ex-
ecute Remote Administration. In the default configura-
tion, no password is set.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 2 0
Enter an access code consisting of a maximum of 5
digits.
Initial state for Programming Mode.
This feature does not work when option 1 is
selected in the programming of code 039"Caller
ID by Name/Number".
In order to enable this feature the "Without MSN
Verification" function (Code 070) must also be
enabled.