Transfer When Extension Is Busy - Siemens HiPath 1100 Programming Manual

Programming an Extension
Step by Step
90

Transfer when Extension is Busy

This setting allows transferring a call when an extension
is busy. A warning tone can be heard on the background
at the extension that receives the transfer, meaning that
there is a call waiting.
When an extension does not answer a call after a speci-
fied period of time or because it is configured with Do
Not Disturb or Data Protection, the call rings at the
extension that originated the transfer. The period of
time a call signals a busy extension can be configured
using the "Timeout for Call Forwarding - No Answer" on
page 70 feature (programming code 130) or through the
HiPath 1100 Manager.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 1
7
or Activate/Deactivate Transfer:
* #
*
#
Initial state for Programming Mode.
Once the call is transferred and answered at the
destination, a disconnect timer is activated (de-
fault is 5 minutes).
A 20-second warning tone is sent to both parties
before the call is disconnected. In order to con-
tinue the call without disconnecting, the destina-
tion number must enter this code (MF , default
"00") to restart the timeout.,
= To activate (default)
= To deactivate