Configuring An External Number - Siemens HiPath 1100 Programming Manual

Step by Step
*
Activating Remote Administration
This setting allows the system to be administered re-
motely.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 6 6
or
Activate/Deactivate Remote Administration:
#
* = To activate
= To deactivate (default)
#
Initial state for Programming Mode.

Configuring an External Number

This specifies external numbers (Service MSN without
external access code 0) that are able to perform Re-
mote Administration.
The default configuration does not specify a MSN.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 6 7
1 ... 4 Select a slot for the external number (1 to 4).
Enter the external number (up to 20).
... Select the next slot for an external number.
1 4
or
Press this key.
#
Initial state for Programming Mode.
General Programming
113