Permissions For A Door Opener - Siemens HiPath 1100 Programming Manual

Step by Step
1
1
1
Deleting DID Extensions
Required: Programming Mode must be active (*95
31994).
1 5 9 Enter the code for programming.
...
Enter the slot for the extension configured as the Door
4
Opener (1 to 4).
Delete DID extensions.
*
# Press this key.
Initial state for Programming Mode.

Permissions for a Door Opener

Different extensions can be individually enabled to acti-
vate the Door Opener.
This class of service is assigned to all extensions by de-
fault.
Required: Programming Mode must be active (*95
31994).
1 2 5 Enter the code for programming.
...
Enter the slot for the extension configured as the Door
4
Opener (1 to 4).
...
Enter the extension numbers (e.g., 12/102) to be en-
abled as Door Openers.
Delete extensions enabled for opening doors.
*
# Press this key.
Initial state for Programming Mode.
Deleting Authorized Extensions
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 2 5
...
Enter the slot for the extension configured as the Door
4
Opener (1 to 4).
Delete the extension assigned to the Entrance Tele-
*
phone slot.
# Press this key.
Initial state for Programming Mode.
Entrance Telephone
121