Step by Step
0
Type of Answering Signal
When a carrier provides this facility, the ticketing pro-
cess occurs in real time. That is, when the called party
answers/hangs up, the public exchange sends a signal
to the system to initiate/end Call Detail Report.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 5 8
Enter a number for an external analog line (e.g., 801).
...
2
Enter the number for the type of answering signal:
= None (Default)
0
= Polarity Reversal
1
= DTMF
2
Enter the next number for the external analog line.
or
#
Press this key.
Initial state for Programming Mode.
When DTMF is selected, you must program a
tone (A, B, C or D) using Manager. If a tone is not
programmed using the Manager, the switch de-
faults to tone A.
When using the GROUND option for Canada,
this feature must be disabled for external lines.
When this feature is activated, outgoing external
calls cannot make consultations or transfer calls
before the destination answers.
Programming an External Line
47