EVM Module
Step by Step
0 1
0 1
156
Message Duration
This setting determines a time period within which the
caller can record a message.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 0 0
...
Enter the time available for the caller to record a mes-
0 5
sage (1 to 5 minutes). The default setting is 2 minutes.
Initial state for Programming Mode.
Mailbox Language
This setting lets you select the language to be used for
the mailboxes.
Required: Programming Mode must be active (*95
31994).
2 0 1
Enter the code for programming.
...
Enter the code for the country or group of countries as
1 9
shown on the table below (e.g., "06" for Portuguese).
The system restarts after the change is made.
Language Code Table for EVM
Code
01
When a call to an extension is forwarded to an
EVM mailbox (call forwarding - No answer or
Busy) a message is played, explaining why the
call is being forwarded.
These messages are played before the greeting
message and cannot be overwritten.
Messages:
•
Call Forwarding - Busy after Call Forwarding
No Answer: "User's connection is
busy at the moment".
•
Call Forwarding - No Answer: "The
user you are calling is not answering."
Language
German
Default