Activating/Deactivating Advisory Tones; Setting Your Own Area Code; Restoring The Handset Default Settings; Advisory Tones - Siemens Gigaset C59H Manual

•
Activating/deactivating

advisory tones

Your handset uses advisory tones to tell you
about different activities and statuses. The
following advisory tones can be activated/
deactivated independently of each other:
u
Key tone: every key press is confirmed.
u
Acknowledge tones:
– Confirmation tone (ascending tone
sequence): at the end of an entry/set-
ting and when an SMS or a new entry
arrives in the call list
– Error tone (descending tone
sequence): when you make an incor-
rect entry
– Menu end tone: when scrolling to the
end of a menu
u
Battery low beep: the battery requires
charging.
In idle status:
Ï
¢ ¢
v
Audio Settings
¢
Advisory Tones
¤
You can enter data in the following fields:
Key Tones:
Select On or Off.
Confirmation:
Select On or Off.
Battery:
Select On or Off.
§Save§
Press the display key.
Please note
You can also set the call volume, the ring-
tones and the advisory tones via the
¢
menu ( page 24).
•
Setting your own area
code
To transfer phone numbers (e.g., in vCards),
it is essential that your area code (interna-
tional and local area code) is saved on the
phone.
Some of these numbers are already
preset.
Ï
¢ ¢
v
Telephony
Check that the (pre)set area code is correct.
¤
You can enter data in the following fields:
q
Select/change input field.
r
Navigate in the input field.
Ñ
If necessary, delete number:
press the display key.
~
Enter number.
§Save§
Press the display key.
Example:
Area Codes
International code:
00 - 7
Local area code:
0 - [ ]
Û
Save
•
Restoring the handset
default settings
You can reset individual settings and
changes that you have made.
The following settings are not affected by a
reset:
u
Registration to the base
u
Date and time
u
Directory entries, the call lists, the SMS
lists
Ï
¢ ¢
v
System
§Yes§
Press the display key.
Setting the handset
¢
Area Codes
¢

Handset Reset

41