Setting The Reception Volume; Area Code For Long Distance Call; Operator Code - Siemens euroset 3020 User Manual

Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the MODE option by using the
DIAL/SELECT key
Select the desired option (TONE or
PULSE) by using the ARROW key
Press the MENU key
Temporary changeover of dialing mode:
While the telephone is set to PULSE dialing
it may be necessary to temporarily change
the dialing mode to TONE dialing.
• Example: You wish to check your
banking balance using the telebank
service. Make the call as you usually
would and, as soon as the call is
completed, press ; at this moment
your telephone dialing mode will change
to TONE dialing. When you finished the
call, just hang up and the dialing mode
will automatically turn back to PULSE
dialing.

Setting the reception volume

This telephone allows adjustment of the
reception volume, which its default is
programmed at normal volume. To select
the desired volume, proceed
following way:
Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the VOLUME RX option by
using the DIAL/SELECT key
Select the desired option (NORM-
normal volume, HIGH-high volume) by
using the ARROW key
Press the MENU key

Area code for long distance call

If necessary, this telephone is able to be
programmed with the area code of your
city. It will allow your telephone to dial
correctly the stored RECEIVED CALLS (in
case of having contracted the Identification
Call Service of your operator - see the item
Call Identification on page
program the area code, proceed in the
following way:
Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the AREA CODE option by
using the DIAL/SELECT key
: Enter the area code (1 to 4 digits)
Press the MENU key

Operator code

If necessary, this telephone is able to be
in the
programmed with the operator code of your
preference. To program the operator code,
proceed in the following way:
Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the OP_CODE option by using
the DIAL/SELECT key
7
11). To