Setting up area codes
Before you can return a call from the Calls list (
area code of the area in which your phone is being used. If your phone is in a mul-
tiple area code area, you must also store the extra codes for that area.
Local Area Code
Ï
¢
v
~
§Save§
a
Extra Codes
Ï
¢
v
~
§Save§
a
Repeat the above steps until all the extra codes have been entered for your area.
A maximum of five (5) extra codes can be stored.
Your phone is now ready for use!
Connecting the USB cable
You can connect a standard USB data cable with
a mini-B connector to the back of your handset
to connect the handset to a PC. To use this func-
tion, the Gigaset QuickSync software must be
installed (
¤
Remove the belt clip (if attached)
¢
(
page 12).
¤
Remove the battery cover (
¤
Connect the USB cable to the USB socket
¢
¢
Telephony
Enter the local area code.
Press the Display key.
Press and hold (idle status).
¢
¢
Telephony
Enter the extra code.
Press the Display key.
Press and hold (idle status).
¢
page 63).
¢
page 33), you must store the local
Local Area Code
Extra Codes
¢
page 12).
1
.
First steps
1
17