Advanced Configuration - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system
2. Tick the checkbox to enable the Intelligent Analysis. And you can view the current
version for the behavior analysis.
3. Set the display information:
 If you select to display the target info and rule info on the alarm picture are
supported; you can enable the functions by ticking the corresponding
checkbox on your demand.
 And if you tick the checkbox of display target info and rule on stream, the
information will be added to the video stream, and the overlay will be
displayed if you get live view or play back by the VS Player.
4. Set the Snapshot:
 You can configure the Notify Surveillance Center function which is used for
uploading the picture to the surveillance center when and VCA alarm occurs.
 You can also set the quality and resolution of the picture separately.
5. Click

7.3 Advanced Configuration

All the parameters for both behavior analysis and face capture are collected in the
© Hikvision
Figure 7-2 VCA Information
to save the settings.
97