HIKVISION Positioning System User Manual page 75

User Manual of Thermometric Bi-spectrum Network Positioning system
Figure 6-40 Digital Noise Reduction-Expert Mode
This function varies depending on the models of positioning system.
 Defog Mode
When there is fog in the image, you can enable this function to get clear image.
 EIS
The live view image would be trembled and dim when the camera is shocked slightly
in some monitoring conditions. And the electronic image stabilization (EIS) function is
used to overcome this problem to ensure a steady and clear image.
 Video Adjustment
 Mirror
If you set the Mirror function to Center, the image will be flipped. It is like the image
in the mirror.
This function varies depending on the models of positioning system.
 Video Standard
You can set the Video Standard to 50hz(PAL) or 60hz(NTSC) according to the video
system in your country.
This function varies depending on the models of positioning system.
 Capture Mode:
The Capture Mode is selectable to meet the different demands of field of view and
resolution.
 Other
 Lens Initialization
The lens operates the movements for initialization when you check the check box of
Lens Initialization.
 Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can
be set to 30, 60, 120, 240 and 480.
© Hikvision
74