User Manual of Thermometric Bi-spectrum Network Positioning system
11.3 Configuring Anonymous Visit
When you enable this function, you can log into the camera without a username and
password.
In login interface, check the Anonymous checkbox and click Login to enter the
camera as shown in Figure 11-6.
11.4 Configuring IP Address Filter
With this function on, the camera allows certain IP addresses whether to log in or
not.
Filter Type
Forbidden
Allowed
© Hikvision
Figure 11-5 Anonymous Login
Figure 11-6 Login Interface
Description
Forbid the IP addresses added in the IP Address
Filter interface to log in.
Allow only the IP addresses added in the IP
Address Filter interface to log in.
Figure 11-7 IP Address Filter
124