Temperature Measurement; Temperature Measurement Configuration - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system
Linkage, you can check the checkbox to enable the alarm output (The alarm
output number varies depending on device ability).
8. Click

6.7 Temperature Measurement

Purpose:
When you enable this function, it measures the actual temperature of the spot being
monitored. The device alarms when temperature exceeds the temperature threshold
value.
Before You Start:
Enter Configuration > Advanced Configuration > System > VCA Resource Type to
select Temperature Measurement + Behavior Analysis as VCA Resource Type.

6.7.1 Temperature Measurement Configuration

Steps:
1. Enter Configuration > Advanced Configuration > Temperature Measurement
Configuration.
2. Check the checkboxes of the interface to set the temperature measurement
configurations.
 Enable Temperature Measurement: Check the checkbox to enable
temperature measurement function.
 Display Temperature Info. on Stream: Check the checkbox to display
temperature information in live view.
 Add Original Data on Capture: Check the checkbox to add original data on
© Hikvision
to save the settings.
Figure 6-57 Dynamic Fire Source Detection
92