Table of Contents
Advertisement
User Manual of Thermometric Bi-spectrum Network Positioning system
(3) You can click the
succeeded.
If the positioning system is connected to a public network, you should use a
NTP server that has a time synchronization function, such as the server at
the National Time Center (IP Address: 210.72.145.44). If the positioning
system is set in a customized network, NTP software can be used to
establish a NTP server for time synchronization.
Configuring Time Synchronization Manually
Steps:
(1) Check the Manual Time Sync radio button.
(2) Click
to set the system time from the pop-up calendar.
(3) Click
to save the settings.
You can also check the Sync. with computer time checkbox to synchronize
the time of the positioning system with the time of your computer.
Select the Time Zone
© Hikvision
Figure 6-3 Time Sync by NTP Server
button to check whether the confguration is
Figure 6-4 Time Sync Manually
48
Advertisement
Table of Contents
