HIKVISION Positioning System User Manual page 16

User Manual of Thermometric Bi-spectrum Network Positioning system
STRONG PASSWORD RECOMMENDED– We highly recommend you
create a strong password of your own choosing ((using a minimum of 8
characters, including at least three of the following categories: upper
case letters, lower case letters, numbers, and special characters) in
order to increase the security of your product. And we recommend you
reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your
product.
4. Click OK to save the password.
You can check whether the activation is completed on the popup window. If
activation failed, please make sure that the password meets the requirement
and then try again.
5. Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the checkbox of Enable DHCP.
6. Input the password and click the Save button to activate your IP address
modification.
 Activation via Client Software
The client software is versatile video management software for multiple kinds of
devices.
Get the client software from the supplied disk or the official website, and install the
software according to the prompts. Follow the steps to activate the camera.
Steps:
1. Run the client software and the control panel of the software pops up, as shown
© Hikvision
Figure 2-5 Modify the IP Address
15