Table of Contents
Advertisement
User Manual of Thermometric Bi-spectrum Network Positioning system
You can click
you can click
on the right side, or click
Modify network parameters
Steps:
1. Select the device to be modified in the device list and the network parameters of
the device will be displayed in the Modify Network Parameters panel on the
right side.
2. Edit the modifiable network parameters, e.g. IP address and port number.
3. Enter the password of the admin account of the device in the Password field and
click
to save the changes.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers and special characters) in
order to increase the security of your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
© Hikvision
or
on each column heading to order the information;
to expand the device table and hide the network parameter panel
to show the network parameter panel.
Figure A.1.2 Modify Network Parameters
131
Advertisement
Table of Contents
