Configuring Nat (Network Address Translation) Settings; Configuring Email Settings - HIKVISION Positioning System User Manual

Thermometric bi-spectrum network

Table of Contents

User Manual of Thermometric Bi-spectrum Network Positioning system

6.3.10 Configuring NAT (Network Address Translation) Settings

Steps:

1. Set the port mapping mode:

To port mapping with the default port numbers:

Choose

To port mapping with the customized port numbers:

Choose

And you can customize the value of the port No. by yourself.

2. Click

Purpose:

The system can be configured to send an Email notification to all designated

receivers if an alarm event is detected, e.g., motion detection event, video loss,

tamper-proof, etc.

Before you start:

Please configure the DNS Server settings under Basic Configuration > Network >

TCP/IP or Advanced Configuration > Network > TCP/IP before using the Email

function.

Steps:

1. Enter the Email Settings interface:

Configuration > Advanced Configuration > Network > Email

Figure 6-23 Configure the Port No.

to save the settings.

Table of Contents