Handling Exception - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system
6. You can copy the settings to other alarm outputs.
7. Click

6.6.5 Handling Exception

The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the positioning systems.
Steps:
1. Enter the Exception Settings interface:
Configuration > Advanced Configuration> Events > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Step 3 in Section 6.6.1 Configuring Motion Detection.
3. Click
© Hikvision
Figure 6-53 Alarm Output Settings
to save the settings.
Figure 6-54 Exception Settings
to save the settings.
88