Table of Contents
Advertisement
User Manual of Thermometric Bi-spectrum Network Positioning system
4.5.4 Setting / Calling a Pattern
Purpose:
A pattern is a memorized series of pan, tilt, zoom, and preset functions. It can be
called on the pattern settings interface. There are up to 4 patterns for customizing.
Setting a Pattern:
Steps:
1. In the PTZ control panel, click
2. Select a pattern number from the list as shown in Figure 4-10.
3. Click
to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the
information of Program Pattern Remaining Memory (%) is displayed on the
screen.
• Pan the positioning system to the right or left.
• Tilt the positioning system up or down.
• Zoom in or out.
• Refocus the lens.
5. Click
to save all the pattern settings.
Buttons on the Patterns interface:
Buttons
These 4 patterns can be operated separately and with no priority level.
© Hikvision
to enter the pattern settings interface.
Figure 4-10 Patterns Settings Interface
Description
Start to record a pattern.
Stop recording a pattern.
Call the current pattern.
Stop the current pattern.
Delete the current pattern.
35
Advertisement
Table of Contents
