HIKVISION Positioning System User Manual page 102

User Manual of Thermometric Bi-spectrum Network Positioning system
to configure the rule for the scene.
1) Click the Rule tab to enter the rule settings interface.
2) Create new rule: Click on the button
3) Select rule type: Click the dropdown menu to select the rule type. Line
Crossing, Intrusion, Region Entrance, and Region Exiting are selectable.
4) Configure the rule area: Click the Draw Line or Draw Area button on the tool
bar of the live view panel. Click the mouse on the live view panel. Right click
the mouse to finish drawing. For details, see 7.5 Rule Configuration
Demonstration.
5) Configure the filtering size: The filtering function is supported for all rules.
You can set the minimum and maximum size of the object needs to be
filtered. The system will only detect the object in a size between the
configured minimum and maximum value. For details, see7.5 Rule
Configuration Demonstration.
6) Enable rules: Check the Enable checkbox of each rule in the rule list to
enable the rule.
7) Click
Create multiple rules: You can create more rules by repeating the above
steps.
 Configure Arming schedule:
1) Click the Arming Schedule tab.
2) Select a rule from the rule list.
© Hikvision
Figure 7-6 Rule List
to save the settings.
to add a new rule.
101