Chapter 4 Live View; Power-Up Action; Live View Page - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system
In this and the following chapters, operation of the positioning system by the web
browser R will be taken as an example.

4.1 Power-up Action

After the power is applied, the positioning system will perform self-test actions. It
begins with lens actions and then pan and tilt movement. After the power-up
self-test actions, the information as shown in Figure 4-1 will be displayed on screen
for 40 seconds.
The System Information displayed on the screen includes the positioning system
model, address, protocol, version and other information. The COMMUNICATION
refers to the baud rate, parity, data bit and stop bit of the positioning system. e.g.,
"2400, N, 8, 1" indicates the positioning system is configured with the baud rate of
2400, no parity, 8 data bits and 1 stop bit.

4.2 Live View Page

Purpose:
The live video page allows you to view live video, capture images, realize PTZ control,
set/call presets and configure video parameters.
Log in the network positioning system to enter the live view page, or you can click
on the menu bar of the main page to enter the live view page.
© Hikvision

Chapter 4 Live View

Model
Address
Communication
Software Version
Camera Version
Language
Figure 4-1 Power-up Information
XX-XXXXXX-X
0
0000,0,0,0
Vx.x.x
Vx.xx
English
26