Table of Contents
Advertisement
User Manual of Thermometric Bi-spectrum Network Positioning system
3) Check the checkbox of corresponding linkage actions to enable it.
4. Advanced Configuration: For details, see section 7.3 Advanced Configuration.
Click Save to save the settings.
7.5 Rule Configuration Demonstration
Purpose:
This section provides detailed configuration steps for each rule.
7.5.1
Line Crossing
Purpose:
This function can be used for detecting people, vehicles and objects traversing a set
virtual plane. The traversing direction can be set as bidirectional, from left to right or
from right to left. The alarm will be triggered if the rule is broken.
Steps:
1. Create new rule: Click on the button
2. Select rule type: Click the dropdown menu and select Line Crossing as the rule
type.
3. (Optional) Configure the size filter, if you want to narrow the detection target to
a desired range.
1) Check the checkbox of the Filter by, and only filer by pixel is available.
2) Click the
© Hikvision
Figure 7-9
Alarm Linkage
to add a new rule.
Figure 7-10
Select Rule Type
button and draw a rectangle on the live view image as
103
Advertisement
Table of Contents
