Recording And Capturing Pictures Manually - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system
You can select the window division mode in the dropdown list, there are single and
2*2 selectable. And you can click to select a window and then double-click a camera
to specify the camera order to view.
3D Positioning:
Steps:
1. Click on the toolbar of live view interface.
2. Operate the 3D positioning function:
 Left click a position of the live video. The corresponding position will be
moved to the center of the live video.
 Hold down the left mouse button and drag the mouse to the lower right on
the live video. The corresponding position will be moved to the center of the
live video and zoomed in.
 Hold down the left mouse button and drag the mouse to the upper left on
the live video. The corresponding position will be moved to the center of the
live video and zoomed out.
Manual Tracking:
Before you start:
Please enter the Smart Tracking settings interface and enable smart tracking first.
Configuration > Advanced Configuration> PTZ > Smart Tracking
Steps:
1. Click on the toolbar of live view interface.
2. Click a moving object in the live video.
The positioning system will track the object automatically.
Please refer to the following sections for more information:
 Configuring remote recording in Section 8.3 Configuring Recording Schedule.
 Setting the image quality of the live video in Section 6.1 Configuring Local
Parameters and Section 6.4.1 Configuring Video Settings.
 Setting the OSD text on live video in Section 6.5.2 Configuring OSD Settings.

4.4 Recording and Capturing Pictures Manually

In the live view interface, click
the captured image will be saved as a JPEG file in your computer by default.
© Hikvision
on the toolbar to capture the live pictures and
29